If you have something to sell, post your add here...
Moderators: elky , rodeobob
gem
Regular Member
Posts: 27 Joined: 27 Nov 2005, 23:32
Location: Melb, Vic
Contact:
Post
by gem » 21 Dec 2005, 12:02
I have two damaged 2.0lt twin cam blocks to give away. If anyone needs a block to use for seting up.
Ideas for uses - cut up block to measure thicknesses
- making brackets to fit onto block
- A big paper weight
pick up only from Melbourne
rodeobob
Moderator
Posts: 16 Joined: 24 Jan 2006, 10:05
Location: Newport, Melbourne
Contact:
Post
by rodeobob » 24 Jan 2006, 10:08
Damaged how????
Cheers. Bob.
gem
Regular Member
Posts: 27 Joined: 27 Nov 2005, 23:32
Location: Melb, Vic
Contact:
Post
by gem » 26 Jan 2006, 08:50
one had a starter motor problem!
-Number 4 piston cam out and broke the starter motor
The other snapped a crank and number 4 rod came through the block.
I had ideas of sectioning the block so I could see the valve to piston clearance when rotating the crank with the head on or if someone needed a dummy block se setup in there engine bay while welding or making brackets?
or I will be throwing them out in the next few weeks.
Poida
Administrator
Posts: 336 Joined: 26 Nov 2005, 12:48
I live in: Vic
Location: NSW-Victoria border
Contact:
Post
by Poida » 26 Jan 2006, 14:56
Go gettem Bob...
rodeobob
Moderator
Posts: 16 Joined: 24 Jan 2006, 10:05
Location: Newport, Melbourne
Contact:
Post
by rodeobob » 28 Jan 2006, 00:20
Nah i dont realy need em.
Bob.
archangel62
Long Term Member
Posts: 338 Joined: 11 Dec 2005, 03:32
Location: Adelaide, Australia
Contact:
Post
by archangel62 » 30 Jan 2006, 18:00
Is it just the blocks or are there parts? I'd be after stuff like dizzy, throttle body, plenum, etc...
Twincam needs: surge tank, EFI lines, TPS, recored radiator, hoses, assemble the ECU (50% done).
Bradlze
Administrator
Posts: 90 Joined: 26 Nov 2005, 13:43
Location: Perth
Contact:
Post
by Bradlze » 30 Jan 2006, 18:12
haha yeah right i bet if they were included he wouldnt be giving them away for free
rodeobob
Moderator
Posts: 16 Joined: 24 Jan 2006, 10:05
Location: Newport, Melbourne
Contact:
Post
by rodeobob » 31 Jan 2006, 03:17
mmmm that makes 6 good cylinders.
lol
gem
Regular Member
Posts: 27 Joined: 27 Nov 2005, 23:32
Location: Melb, Vic
Contact:
Post
by gem » 01 Feb 2006, 09:27
You could mount them side by side and have a V6.
Or back to back and have a flat 6.
archangel62 - I have other parts for sale ! I already sold you that Plenum, How is it going?
archangel62
Long Term Member
Posts: 338 Joined: 11 Dec 2005, 03:32
Location: Adelaide, Australia
Contact:
Post
by archangel62 » 03 Feb 2006, 03:31
lol Yeah, well, it fits and that's what matters. The engine's still in bits. I was just wondering if you're giving away any other parts
But yeah, I wouldn't expect you to be.
Twincam needs: surge tank, EFI lines, TPS, recored radiator, hoses, assemble the ECU (50% done).
GeminiCoupe
Long Term Member
Posts: 146 Joined: 26 Nov 2005, 18:18
Location: Melbourne, VIC
Contact:
Post
by GeminiCoupe » 06 Feb 2006, 20:28
Dont happen to have the standard engine mounts on them do they? Or the oil cap for the rocker cover?
Nick-
Project One - 1976 TX Gemini Coupe G200z Turbo
Daily - S15 200SX, 13.29 @ 107mph
gem
Regular Member
Posts: 27 Joined: 27 Nov 2005, 23:32
Location: Melb, Vic
Contact:
Post
by gem » 07 Feb 2006, 09:16
Sorry GeminiCoupe Don't have either of those parts spare. I have various other parts but my spares are getting less and less. When I get time I will post a list of all of what is left.
elky
Moderator
Posts: 104 Joined: 27 Nov 2005, 06:54
I live in: Qld
Location: Sunshine Coast
Contact:
Post
by elky » 27 May 2008, 23:26
i'll stuff crack up your arse and call in the sniffer dogs, get the fook off this forum spam merchants!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Gem-wreck
wrecking gemini's, piazzas, early rodeo's and jackaroo's 0419021757
Bradlze
Administrator
Posts: 90 Joined: 26 Nov 2005, 13:43
Location: Perth
Contact:
Post
by Bradlze » 29 May 2008, 10:00
elky wrote: i'll stuff crack up your arse and call in the sniffer dogs, get the fook off this forum spam merchants!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
all cleaned Elky
elky
Moderator
Posts: 104 Joined: 27 Nov 2005, 06:54
I live in: Qld
Location: Sunshine Coast
Contact:
Post
by elky » 29 May 2008, 22:59
y do they target this site? i never see this on other ones
Gem-wreck
wrecking gemini's, piazzas, early rodeo's and jackaroo's 0419021757
Bradlze
Administrator
Posts: 90 Joined: 26 Nov 2005, 13:43
Location: Perth
Contact:
Post
by Bradlze » 30 May 2008, 10:57
cos we are so god dam shit hot!! haha
elky
Moderator
Posts: 104 Joined: 27 Nov 2005, 06:54
I live in: Qld
Location: Sunshine Coast
Contact:
Post
by elky » 31 May 2008, 11:12
i think things should be changed so you acutally have to join up to post.....
Gem-wreck
wrecking gemini's, piazzas, early rodeo's and jackaroo's 0419021757
IZU069
Moved On
Posts: 394 Joined: 31 Jan 2006, 02:51
I live in: Vic
Location: Melbourne
Contact:
Post
by IZU069 » 01 Jun 2008, 11:51
x2. Though it is nice for "casuals" to be able to drop I line - many times I want to add a killer comment but couldn't be bothered joining, even with a spare throwaway email address.
Maybe have an open "guests (& sex bloggers) forum".
But the rest should be blocked unless Poida Esq et al have the time to filter and remove the crap (and we don't mind the false alerts/emails).
IZU069 - Isuzu means a lot to me.
archangel62
Long Term Member
Posts: 338 Joined: 11 Dec 2005, 03:32
Location: Adelaide, Australia
Contact:
Post
by archangel62 » 02 Jun 2008, 04:51
Aha!
What if you have to type in the random letter combinations to post as guest? Like the skewed pictures that say like "XWT2DOG" or something...
btw PM sent Gem lol
Twincam needs: surge tank, EFI lines, TPS, recored radiator, hoses, assemble the ECU (50% done).
IZU069
Moved On
Posts: 394 Joined: 31 Jan 2006, 02:51
I live in: Vic
Location: Melbourne
Contact:
Post
by IZU069 » 03 Jun 2008, 17:42
Yep - the pixelated codes would be good, but that's another bit of web design or upgrade.
The strange thing is that these posted links seem invalid anyhow. Are they just junk-spamming various sites? Have the terrorist attacks started?
And yeah - still no OzGem.
IZU069 - Isuzu means a lot to me.
Poida
Administrator
Posts: 336 Joined: 26 Nov 2005, 12:48
I live in: Vic
Location: NSW-Victoria border
Contact:
Post
by Poida » 17 Jul 2008, 17:14
I thought about that but still like to leave it open so everyone can read it. Perhaps a read option but need to join to be able to post.
archangel62
Long Term Member
Posts: 338 Joined: 11 Dec 2005, 03:32
Location: Adelaide, Australia
Contact:
Post
by archangel62 » 19 Jul 2008, 05:08
Yeah that sounds perfect. Definitely leave it free to view unreg, but anonymous posting should require the typing of the scrambled word.
Hahahah this thread is so funny to read through, it's like blah blah free blocks, do you have a blah blah I'LL RIP YOUR F**KING BALLS OFF!!! hahahah
Good call though elky
Twincam needs: surge tank, EFI lines, TPS, recored radiator, hoses, assemble the ECU (50% done).
elky
Moderator
Posts: 104 Joined: 27 Nov 2005, 06:54
I live in: Qld
Location: Sunshine Coast
Contact:
Post
by elky » 27 Jul 2008, 09:17
after cleaning up the thread my comment looks a bit out of place!
was gonna edit it but i like it
cheers
Gem-wreck
wrecking gemini's, piazzas, early rodeo's and jackaroo's 0419021757