Injector specs

Moderators: elky, rodeobob

Post Reply
Robbo
Regular Member
Regular Member
Posts: 46
Joined: 26 Nov 2005, 18:42
Location: Brisbane
Contact:

Injector specs

Post by Robbo »

Thought others might find the injector specifications usefull.

I have a G180W and my injectors are stamped with A46-000001, if yours are too, these are the specifications

manufacturer: JECS
impendance: 2.4ohms
flow: 196cc at 3bar

Poida
Administrator
Administrator
Posts: 334
Joined: 26 Nov 2005, 12:48
I live in: Vic
Location: NSW-Victoria border
Contact:

Re: Injector specs

Post by Poida »

I have looked closer at my G180W injectors and after researching it seems quite a few JECS injectors have the number A46-000001 on the body opposite the 'Made in Japan' marking. I did note that these are both 'cast in' raised markings which often only describe the reference to a base part number and the fine tune parts might be tuned for different applications. What I have also found is a series of markings that are 'stamped' into the top, not raised cast marks. The marks are: 0 210 12 26
My injectors are hose tails with a green body and have a two bolt mount plate to the manifold.

Are these the same numbers you have on your injectors Robbo?

Post Reply