It is currently 19 Oct 2017, 16:21


Injector specs

Moderators: rodeobob, elky

  • Author
  • Message
Offline

Robbo

Regular Member

Regular Member

  • Posts: 46
  • Joined: 26 Nov 2005, 18:42
  • Location: Brisbane

Injector specs

Post27 Nov 2005, 18:50

Thought others might find the injector specifications usefull.

I have a G180W and my injectors are stamped with A46-000001, if yours are too, these are the specifications

manufacturer: JECS
impendance: 2.4ohms
flow: 196cc at 3bar
Offline

Poida

Administrator

Administrator

  • Posts: 336
  • Joined: 26 Nov 2005, 12:48
  • Location: NSW-Victoria border
  • I live in: Vic

Re: Injector specs

Post04 Aug 2012, 13:26

I have looked closer at my G180W injectors and after researching it seems quite a few JECS injectors have the number A46-000001 on the body opposite the 'Made in Japan' marking. I did note that these are both 'cast in' raised markings which often only describe the reference to a base part number and the fine tune parts might be tuned for different applications. What I have also found is a series of markings that are 'stamped' into the top, not raised cast marks. The marks are: 0 210 12 26
My injectors are hose tails with a green body and have a two bolt mount plate to the manifold.

Are these the same numbers you have on your injectors Robbo?

Return to G180W

Who is online

Users browsing this forum: No registered users and 1 guest

cron