It is currently 23 Apr 2018, 07:07


G200W distributor cap

Known resources of twin cam spare part suppliers...

Moderators: rodeobob, elky

  • Author
  • Message
Offline

Coley

Probationary Member

Probationary Member

  • Posts: 7
  • Joined: 28 Nov 2005, 11:52
  • Location: HOBART TASMANIA

G200W distributor cap

Post27 Dec 2005, 20:02

Gday

I have g200w with a points distrubutor, i'm guessing its an older distributor for that engine. Anyway the distributor cap is arcing between terminals, I can see it in the dark. There are no visible cracks in the cap. Does anyone have any ideas where i could possibly get a dizzy cap from to suit that distributor?

Any info would be great!


Cheers
Offline

Coley

Probationary Member

Probationary Member

  • Posts: 7
  • Joined: 28 Nov 2005, 11:52
  • Location: HOBART TASMANIA

Post05 Jan 2006, 11:07

I have finally got my engine running quite well with the twin carbys, the arcing distributor doesn't seem to be affecting the performance of the engine. Now the sump is leaking and I was wondering if anyone knows where I could get a G200w sump gasket?
Offline

Robbo

Regular Member

Regular Member

  • Posts: 46
  • Joined: 26 Nov 2005, 18:42
  • Location: Brisbane

Post05 Jan 2006, 13:53

pretty much can't get a sump gasket for the twincams

try slightly tightening the bolts (note, they should not be done up tight, just done up so the gasket is being squished a bit). or try putting some silicon instant gasket on the rubber aswell if there isn't already some on there.
Offline

archangel62

Long Term Member

Long Term Member

  • Posts: 338
  • Joined: 11 Dec 2005, 03:32
  • Location: Adelaide, Australia

Post21 Jan 2006, 22:55

A place near me can get head gaskets made, I don't know about sump gaskets, but I'd imagine they could have them made. Enquire at all sorts of car places near you, ask if they can have sump gaskets custom made. It shouldn't cost too much (under $100?).
Image
Twincam needs: surge tank, EFI lines, TPS, recored radiator, hoses, assemble the ECU (50% done).
Offline

Tassie ZZ/Z

Probationary Member

Probationary Member

  • Posts: 13
  • Joined: 27 Nov 2005, 11:56
  • Location: Victoria & Tassie

Post03 Aug 2006, 20:58

chop&glue a sohc cam one
ZZ/Z DOHC - The way they should have been
Offline

IZU069

Spaminator

Spaminator

  • Posts: 399
  • Joined: 31 Jan 2006, 02:51
  • Location: Melbourne
  • I live in: Vic

Re: G200W distributor cap

Post21 Oct 2009, 18:11

Or convert a Gemini dizzy with RB reluctor.
(Though Bellett caps = Datsun 1600, Cherry etc fit DOHC points dizzies.)
IZU069 - Isuzu means a lot to me.

Return to Part Suppliers

Who is online

Users browsing this forum: No registered users and 1 guest

cron