G200W dizzy

If you are looking for something post your request here...

Moderators: elky, rodeobob

Post Reply
Jason_g200w
New Member
New Member
Posts: 2
Joined: 15 Jul 2007, 22:41
Location: melbourne
Contact:

G200W dizzy

Post by Jason_g200w »

Looking for a dizzy for a G200W, points or electronic
dose not matter if it is complete or not...
I bought a g200w and the guy who owned it had badly converted electronic dizzy, the rotor cuts up the cap the shaft has a bad wobble.

if anyone can help let me know.

GeminiCoupe
Long Term Member
Long Term Member
Posts: 146
Joined: 26 Nov 2005, 18:18
Location: Melbourne, VIC
Contact:

Post by GeminiCoupe »

Give elky or bradlez a pm, they should have some lieing around
Project One - 1976 TX Gemini Coupe G200z Turbo
Daily - S15 200SX, 13.29 @ 107mph

bad 44u
Regular Member
Regular Member
Posts: 110
Joined: 17 Jan 2007, 13:59
Contact:

Post by bad 44u »

hey jason i thought about it after i left. if your stinger can control ignition modify the crappy dizzy to be a magnetic pickup pull the guts out and block the top off and run 4 coil pack's. or get a crank angle sensor. that will give you heaps more control over the ignition curve and a better spark.

Jason_g200w
New Member
New Member
Posts: 2
Joined: 15 Jul 2007, 22:41
Location: melbourne
Contact:

Post by Jason_g200w »

building turbo engine, so 4 coil pack would be best where would be the best place to pick up a magnetic pickup setup to suit.....
got a microtech fuel only ECU but want to get fuel + ignition ECU...

bad 44u
Regular Member
Regular Member
Posts: 110
Joined: 17 Jan 2007, 13:59
Contact:

Post by bad 44u »

the cheapest is to modify the existing dizzy but if the shaft is bent that wont work. also most efi compaies will sell one to suit the computer. all it is is a magnet drilled into the pulley on front of the crank and a sensor that bolts on near by. then get some bosch coil packs.
msd deffinitely make a crank sensor.

Post Reply