Delco ECM Wiring Schematics

The Delco 1227808 EMS...

Moderator: rodeobob

Post Reply
Poida
Administrator
Administrator
Posts: 334
Joined: 26 Nov 2005, 12:48
I live in: Vic
Location: NSW-Victoria border
Contact:

Delco ECM Wiring Schematics

Post by Poida »

Last edited by Poida on 12 Apr 2009, 22:19, edited 1 time in total.

antus
Administrator
Administrator
Posts: 55
Joined: 23 Aug 2006, 03:19
Location: Adelaide
Contact:

Post by antus »

Delco 4 cyl ignition circuit

Hacked together from a couple of sources:

Image

The ignition module converts the AC wave from the reluctor in to a DC square wave. This is fed back to the ecu, and below 400 RPM switches the coil giving 10 degrees constant advance for start up. If you were to disconnect the 4 pin connector you should still get spark with constant advance at any rpm.

Then above 400 RPM the ECU raises the bypass line which switches the relay and the square wave then comes from the ECU which includes the programmed advance in the timing. This is normal operation.

The module switches the coil negative.

Post Reply