FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)

If you have something to sell, post your add here...

Moderators: elky, rodeobob

Post Reply
IZU069
Spaminator
Spaminator
Posts: 394
Joined: 31 Jan 2006, 02:51
I live in: Vic
Location: Melbourne
Contact:

FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)

Post by IZU069 »

Mainly to take advantage of the pickup in Adelaide and return to Melbourne between this Fri-Mon 12-15Dec08....

Twincam extractors (Pacemaker) and forward-down oil filter to suit a Gemini.
(I also have an oil filter that's been taped for an oil cooler.)

Refer to FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)
IZU069 - Isuzu means a lot to me.

IZU069
Spaminator
Spaminator
Posts: 394
Joined: 31 Jan 2006, 02:51
I live in: Vic
Location: Melbourne
Contact:

Re: FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)

Post by IZU069 »

These are the ones Archangel32 is getting - see OzGem's Repairing extractors?

PS - nice to be back!
IZU069 - Isuzu means a lot to me.

archangel62
Long Term Member
Long Term Member
Posts: 338
Joined: 11 Dec 2005, 03:32
Location: Adelaide, Australia
Contact:

Re: FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)

Post by archangel62 »

Thanks Peter!
Although things are still in the works, and therefore not actually working, I do now have these extractors and am trying to repair them and shoehorn them onto my engine. Fingers crossed.
Eli
Image
Twincam needs: surge tank, EFI lines, TPS, recored radiator, hoses, assemble the ECU (50% done).

IZU069
Spaminator
Spaminator
Posts: 394
Joined: 31 Jan 2006, 02:51
I live in: Vic
Location: Melbourne
Contact:

Re: FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)

Post by IZU069 »

I sometimes wonder what people are thinking when they make extractors....
Though sometimes they are merely an exhaust that fits, or to replace cracked manifolds (as per 4ZE1s).

I should take the measurements of the G200W manifold rather than calculate etc, though tallying the calcs may be handy for later mods.

At least there is no shortage of exhaust flanges LOL! (I've been meaning to tell you - I got 2 from Mr. S (& thereby closer to a formal exit of a former site).)
IZU069 - Isuzu means a lot to me.

archangel62
Long Term Member
Long Term Member
Posts: 338
Joined: 11 Dec 2005, 03:32
Location: Adelaide, Australia
Contact:

Re: FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)

Post by archangel62 »

I have a mate who works at an exhaust shop, says he'll try to modify the extractors to suit. Now I've just gotta save up some dosh!

Anyway, I feel endebted to you. How much do I owe you? Want that exhaust flange? Or monies? I'm not fussed, but you did help me out, even if the extractors weren't entirely, well, serviceable! :lol:

Eli
Image
Twincam needs: surge tank, EFI lines, TPS, recored radiator, hoses, assemble the ECU (50% done).

IZU069
Spaminator
Spaminator
Posts: 394
Joined: 31 Jan 2006, 02:51
I live in: Vic
Location: Melbourne
Contact:

Re: FS-EOI: DOHC extractors & filter; Adel-Melb (GxxxW)

Post by IZU069 »

Now let's see - what's a soul worth?
Nah - forget it, I already have an r-sole residing within.

I got 2 of those flanges neither of which I expect to use, but one is going elsewhere...
But I will honor the original deal - I just felt it was worthwhile getting them whilst they were available. (Something that we Bellett & older Isuzu owners know.)
And I think you may find them worthwhile since most Gemini owners have no choice but to fabricate extractors. (Alas we of the pre-GM Isuzu can use the st'd (G200W) exhaust manifolds until a better performance extractor comes along.)

As to payment - just try to remember your debt.
That debt settlement will have a very high priority soon after I return from my 'round Oz trip for which I still intend to depart during September 2005.
(But I'll be getting back into G-Ws after that return. By then there may be other things I want. Like an analog ECU (new-gen, not old!!).)

Cheers,
P.
IZU069 - Isuzu means a lot to me.

Post Reply