Page 1 of 1
FS....G200W and 5 speed gearbox to suit...Brisbane
Posted: 22 Mar 2006, 23:18
by Thirsty
G200W {TwinCam} and 5 speed gearbox to fit engine
Has auto flywheel. G161 flywheel available if needed.
Very Good Condition
Surplus to requirements..I thought I could run it in a rally car but PF60 were only homologated with 1800 twin cam
$1000.00
Motor has all sensors but no computer. You can approach Warren Chandler in Melbourne for MegaSquirt computer.
North West side Brisbane
Have pics and video.
0419644951
Posted: 23 Mar 2006, 13:22
by archangel62
Pics and videos are always good! How big are the videos, and what are they of?
I'm not in the market but GL with sale, should sell no probs. I'm just curious, what kinds of sensors are used, ie what kinds of cars are they off of?
G200W
Posted: 20 May 2006, 10:40
by Thirstys001
G200W {TwinCam} and 5 speed gearbox to fit engine
Has auto flywheel. G161 flywheel available if needed.
Very Good Condition
Surplus to requirements..I thought I could run it in a rally car but PF60 were only homologated with 1800 twin cam
$900.00
Motor has all sensors but no computer. You can approach Warren Chandler in Melbourne for MegaSquirt computer.
North West side Brisbane
Have pics and video.
0419644951
http://img93.imageshack.us/slideshow/pl ... 468c3.smil
http://img160.imageshack.us/slideshow/p ... 51ecb.smil
for pics and
http://media.putfile.com/G200W
for video
Thirsty
Posted: 20 May 2006, 10:49
by Thirsty2001
I'm not in the market but GL with sale, should sell no probs. I'm just curious, what kinds of sensors are used, ie what kinds of cars are they off of?
The engine has standard fittings on the block. As to what car is the engine is from:---
Quote from OzGemini:--
Its a 117 engine. Has the forward-facing t/b plenum and the oil filter is in the middle of the engine, not front-and-down like the Piazza type. Will need a Diesel crossmember.
Thirsty
I have done a compression test and the results are:-
4...130
3...100
2...80
1...100
They are low I know. The results were the same with a spray of Lanox in barrels and with engine oil squirt in barrels which makes me think it will be valve grind needed. VRS is available form Burson Automotive [Approx $170.00} Thirsty
Posted: 21 May 2006, 04:23
by archangel62
Ah misread sorry.
Posted: 10 Jun 2006, 12:33
by Thirsty2001
Price has been dropped to $850.00.
Thirsty
Posted: 05 Aug 2006, 12:29
by Thirsty
Now $800.00...Thirsty
Posted: 15 Aug 2006, 17:52
by acarnamedjane the II
if you'll arrange to send it to an address in Adelaide (p/code: 5033) for that price, let me know and i could be interested.
is there any chance it could need more than a valve regrind for $170?
cheers
simon
Posted: 18 Aug 2006, 14:28
by Thirsty
G'day..
Mate I will deliver the engine and gearbox to a freight company here in Brisbane on a pallet, but you pay freight.
As to the rest of the engine it looks clean, no leaks, the manifold where the water from radiator enters the engine is clean with no pits and it doesn't knock when it is turned over. Best I can tell you.
Cheers,
Ross
Posted: 01 Sep 2006, 20:25
by archangel62
My mate is interested. If Simon (acarnamedjane) doesn't want it email my mate Neal "
neal_kelly2002@hotmail.com" and see if he's interested - he'd pay for freight to Adelaide.
-Eli
Posted: 04 Sep 2006, 22:22
by Thirsty
G'day.
All sold thanks, guys.
Thirsty
Posted: 05 Sep 2006, 18:22
by archangel62
I hope you put him onto this site
