Isuzu G-series Twin Cam

Pretty choice little setup I thought in this link

http://www.trademe.co.nz/Trade-Me-Motor ... 161500.htm

Clutch system on superchargers are usually turned on by an ECU, I guess at a certain TPS % but you can just hook them up to a switch so you can turn it on or off manually I'm not sure what type you should be using, I know the Toyota SC12 or SC14 would be your cheapest bet (cheap over here in NZ at l...

How thick is your shim? I'm looking at shimming my lsd too.

82 iirc

The two bolt holes in the sump look the same as my Piazza sump. I can't fully remember but I'm pretty sure it had 2 flexable tabs on it to hold up a hose of some sort, probably AC/PS.

Cheers. Hopefully Elky has me sorted with an upright filter. I'll PM you if I get desperate.

Here's some pics from the Piazza I wrecked. http://img266.imageshack.us/img266/643/dscf2534iu4.jpg http://img266.imageshack.us/img266/2203/dscf2535zr4.jpg Looks like this now though :D I still have the original bits so if you need any pictures, just ask. http://img504.imageshack.us/img504/3972/dscf3...

mine is 3.9

Let me know if you're keen to sell that oil filter housing. I'm in NZ and putting a twin cam into a Bellett and those upwards filter housings are unobtainable here.

I also have a Gemini/Piazza one if you needed one to swap it with.

Have you taken the head apart at all? you could have a couple of shims mixed up

Updated

I'll have a good look at the Piazza box I have tomorrow and see if it will fit up properly, unfortunately its got a few teeth missing so I'll have to find another one. What advantage will having 2 leaves back to back in the rear give? and what have you done to adjust camber in the front? Cheers heap...

I'm loving this forum! - Great info. I definitely want to switch to a 5 speed but Isuzu bits are a bit harder to get here. I may have to get it going with the stock box untill I find a 5 speed. Does the Gemini box bolt into the crossmember or will this need to be modified? Cheers for the info on tho...

Sweet cheers for all that info IZU! Especially the brakes all they're my main worry. I see Brett from ozgem used mitsi brakes front and rear from a Sigma - We didn't get magna's here so I guess its just a re-badge? I never though of using a Gemini front pulley, I'm pretty sure the g150 pulley doesn'...

Hey guys you can check out my new Bellett project over at: http://www.oldschool.co.nz/phpbb/viewtopic.php?f=17&t=14152 I've also got a Gemini coupe but its receiving some Toyota goodness instead :oops: Plans for the Bellett is just a stock bottom end g200w with a bit of a cleanup on the ports, l...

Here ya go, I think you're right Elky.

Engine is going into a Bellett so I'm just getting rid of all the stuff I don't need. Also getting rid of the stock EFI system

What is this thing on the water outlet. It sits on a rubber mount. Engine is from a Piazza.


Circled in red.